CPAP.HK 衛家睡眠呼吸機專門店
瑞思邁 ResMed AirSense 11 自動睡眠呼吸機 Auto CPAP
瑞思邁 ResMed AirSense 11 自動睡眠呼吸機 Auto CPAP
Couldn't load pickup availability
推廣期間選購![]()
AirSense 11 可獲贈送:
(1) 標準或入鼻孔式面罩($980) 一套 (如選擇$1000或以上面罩需補款$300)
(2) 加熱加濕器, 及
(3) 免費升級到$680加熱喉管, 及
(4) 價值$130 AirSense 11睡眠機代用即棄過濾棉12片
(優惠期至2026年3月31日，推廣數量有限，售完即止)
$7,900 價格已包括 AirSense 11 自動睡眠呼吸機主機，標準鼻罩或入鼻孔式鼻罩，加熱加濕器，旅行袋及國際電壓的變壓器各一個. 明碼實價，絕無取巧，歡迎致電查詢 (Tel. 6645 8282)
CPAP.HK衛家提供2年原廠保養（包括人工及零件），永久免費人工保養。
瑞思邁 ResMed AirSense 11 自動睡眠呼吸機CPAP (附有加濕器)擁有多種功能，能協助用户展開治療及提供整晚舒適的治療和睡眠。
AirSense 11 自動正氣壓睡眠呼吸機沿用獨家的專利技術, 針對每個呼吸中的「氣流受限」、鼻鼾以及窒息作出適當的反應，確保提供適時合適的氣壓。
- 簡易“智慧型”開關按鈕: 每次只需輕按 [開始/停止按鈕]便可輕鬆開始和停止治療。只要睡眠呼吸機偵察到你的呼吸，治療便開始。當您取下面罩，它在幾秒鐘後停止。
- 整合HumidAir™加熱加濕器: 佩上ClimateLine™超幼加溫喉管，為您提供全面的氣候控制技術。可以使用氣候控制功能作自動或手動操作。
- 自動氣漸升(AutoRamp) 功能: 開始時先提供低氣壓，幫助您入睡，然後續漸增加到預設的氣壓。
- 呼氣壓緩解(EPR)功能: 於吸氣時保持常規氣壓，於呼氣時降低氣壓，讓用户倍感舒適。
- Easy-Breathe馬達技術: 大大減低製風的嘈音，讓您寧靜中安睡。
- 觸控式屏幕: 易於明白、使用和操作操作。內置光感應器，屏幕亮度會跟據四周環境而調整，確保不會影響您的伴侶安睡。
物理規格
含 HumidAir 11 水箱尺寸（高 x 寬 x 深）：94.5 毫米 x 259.4 毫米 x 138.5 毫米
含側蓋尺寸（高 x 寬 x 深）：94.5 毫米 x 236.8 毫米 x 138.5 毫米
出風口：22 公釐錐形出風口符合 EN ISO 5356-1:2015 標準
重量 - 含 HumidAir 11 水箱：1130 公克
重量 - 含側蓋：1142 克
水箱容量：380 毫升
加濕器水箱加水間隔時間：> 8 小時 ±0.5 小時（23 ±2°C 測試）
加濕器水箱建議使用水型式（標準水箱）：蒸餾水
加濕器水箱建議使用水種類（可清洗水箱）：飲用水
技術規格
工作壓力範圍：4 至 20 cmH2O（4 至 20 hPa）
最大單故障穩態壓力：如果穩態壓力超過 40 cm H2O（40 hPa）且持續時間超過 1 秒，設備將因單一故障而關閉。
Sales Promotion:
AirSense 11 CPAP device set with:
1) FREE mask (price below $1000, or pay $300 for upgrade to other mask)
2) FREE UPGRADE to heated tubing (worth $680)
3) FREE filters (12 pieces of generic white filters, worth $130)
promotion ended on 31 March, 2026, while stock lasts.
Price includes the AirSense 11 cpap main body with standard mask, humidifier, travel case, universal voltage power supply. Feel Free to contact us for detail (Tel: 6645 8282)
CPAP.HK provides 2 years of product warranty (labour and parts)
Each AirSense 11 CPAP device includes a wide range of features designed to provide comfortable therapy to help you get started and stay on track throughout your sleep apnea treatment journey.
Colour touchscreen: Easy-to-use, understand and operate
Simple start/stop button: easy to start and stop therapy with just one tap
EPR (Expiratory Pressure Relief) - Reduces the pressure when you exhale.
Auto Ramp - Slowly eases the user into higher pressures by starting out on a low setting.
SmartStart - Breathe in and the machine will start automatically.
Smart Stop - Auto turn off when the mask is removed.
Humidification - Climate control auto setting
Mask Fit - allows the user to know when an air leak has occurred.
ClimateLineAir Tubing (Optional) - Heated tubing that helps reduce CPAP side effects like rainout or dry mouth
Physical Specifications
Dimensions (H x W x D) with HumidAir 11 tub: 94.5 mm x 259.4 mm x 138.5 mm
Dimensions (H x W x D) with side cover: 94.5 mm x 236.8 mm x 138.5 mm
Air outlet: The 22 mm conical outlet connector complies with EN ISO
5356-1:2015
Weight - device and HumidAir 11 tub: 1130 g
Weight - device with side cover: 1142 g
Housing construction: Flame retardant engineering thermoplastic
Hot plate - Material: Stainless steel
Water capacity: 380 mL
Time between each refill of the humidifier tub: > 8 hours ±0.5 hours (tested at 23 ±2°C)
Recommended water type to use in the humidifier tub (Standard tub): Distilled water
Recommended water type to use in the humidifier tub (Cleanable tub): Drinking quality water (potable)
Humidifier tub - Material: Injection moulded plastic, stainless steel and silicone seal
Technical specifications
Operating pressure range: 4 to 20 cmH2O (4 to 20 hPa)
Maximum single fault steady state pressure: Device will shut down in the presence of a single fault if the steady state pressure exceeds: 40 cm H2O (40 hPa) for more than 1 second.
Pressure measurement tolerance: ± 0.5 cm H2O (0.5 hPa) ±4% of measured reading
Flow measurement tolerance: ± 6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
Mode pressure ranges:
CPAP: 4-20 cm H2O (4-20 hPa) (measured at the mask)
CPAP with EPR mode: 4-20 cm H2O (4-20 hPa) CPAP with EPR settings: EPR off, Level 1 = 1.0 cm H2O (1 hPa), Level 2 = 2.0 cm H2O (2 hPa), Level 3 = 3.0 cm H2O (3 hPa).
AutoSet, AutoSet for Her mode: 4-20 cm H2O (4-20 hPa)
AutoSet, AutoSet for Her mode with EPR: 4-20 cm H2O (4-20 hPa) APAP with EPR settings: EPR off, Level 1 = 1.0 cm H2O (1 hPa),
Level 2 = 2.0 cm H2O (2 hPa), Level 3 = 3.0 cm H2O (3 hPa).
EPR reduces the pressure during expiration by the amount dependant on the level set above, but the pressure delivered will not
drop below 4.0 cm H2O (4 hPa).
